Height-adjustable glass combines a fixed panel with a movable section. Raise the glass for more shelter and lower it to open up the view. It suits decks, terraces and patios where wind conditions change throughout the day or season, giving you control over when you need shelter.
You can adjust the height to suit the weather, gain shelter without a permanently tall glass screen and retain the view. Depending on the model, gas struts assist with raising and lowering the panel. Position the windbreak where shelter is most needed. The larger exposed glass area when raised means the posts, fixings and supporting structure must be designed for the wind loads.
The glass does not normally need to extend all the way down to the floor or supporting surface. A small gap beneath the glass can make installation easier, allow the lower edge to be cleaned and let water and dirt pass through. The permissible gap depends on where the balustrade is installed.
Openings must be designed to reduce the risk of children squeezing through or becoming trapped, particularly on balconies and in homes. Glass clamps, posts and glass dimensions need to be considered together, as slopes or uneven surfaces may affect the gaps. Follow the balustrade system’s dimensions and installation instructions, and check the applicable local requirements.
If your glass balustrade is faulty or a component is damaged, contact us as soon as possible so we can advise on the next steps. This applies to issues noticed on delivery as well as faults that appear later. Please provide your order number, photographs of the affected part or damage, a short description and when you first noticed the problem.
If any glass, posts or fittings are damaged in transit, photograph the damage before installation and keep the packaging. Warranty terms depend on the product, while statutory consumer rights depend on where the purchase was made. We will explain the next steps for your order.
The stability of a glass windbreak depends on the glass, posts, fittings and fixings being designed for the wind loads at the site. The whole structure matters, not just the thickness of the glass. Thicker glazing alone cannot compensate for inadequate supports or fixings.
A tall windbreak on an exposed balcony or terrace is subject to greater wind forces than a lower screen in a sheltered position. Its fixings must therefore be anchored to a load-bearing structure, as decking boards, paving slabs and other surface finishes may not be sufficient. If the screen moves or vibrates noticeably in strong winds, check the fixings, posts and brackets.
The price of a glass balustrade depends on its length, model, glazing, fixings and optional extras, so there is no single price for every project. Enter your measurements and preferences in the configurator to see your price. Frameless glass balustrades typically require more substantial fixings and thicker glass and therefore tend to cost more than post-supported systems.
Longer balustrades need more material, but the price per metre often falls across longer, straight runs. Glass type, corners, end details, top rails and colour also affect the cost. Your balustrade is supplied as a complete kit with installation instructions so you can install it yourself.
A frameless glass balustrade has no visible posts between the glass panels, while a post-supported system uses posts and fittings to support the glazing. Frameless designs offer more uninterrupted views and a minimalist appearance; posts give you additional options for combining materials and details.
In a frameless system, the glass is held in a substantial base channel, which places greater demands on the supporting structure and typically calls for thicker glazing. This tends to increase the cost. With posts, colour and top rails can form part of the design. Choose frameless glass when uninterrupted views matter most, or posts for more flexibility in materials and appearance.
The main differences are weight, appearance and finish. Aluminium is lightweight and can be powder-coated in a range of colours, while stainless steel is heavier and has a distinctive metallic appearance. Both can perform well outdoors when the material grade and balustrade design suit the location. Aluminium forms a protective oxide layer, with the coating providing additional surface protection.
For stainless steel, the grade must be chosen to suit the environment, particularly near the sea, and the surface cleaned as needed. The stability of a balustrade depends on the complete system, not just the post material. Choose aluminium if you want a particular colour, or stainless steel if you prefer the metal itself to be part of the design.
A suitable pool balustrade should provide a clear boundary, good visibility and components appropriate for a damp environment. Glass balustrades are popular because they preserve views across the pool area while offering some wind shelter, making the space more comfortable to use.
Posts, fittings and fixings around pools should be selected to suit moisture and exposure to pool chemicals. Appropriate grades of stainless steel or powder-coated aluminium may be suitable depending on the environment. Consider child safety, climbing risks, openings and gates when planning the layout. A balustrade never replaces supervision of children; check the relevant local pool safety requirements.
A glass balustrade provides a modern, open feel whether installed on a deck, balcony, indoor staircase or around a pool. It preserves the view and natural light while helping to reduce wind exposure. We manufacture every glass balustrade to your measurements at our factory in Ängelholm, so it fits your installation area.
On a deck, glass preserves views of the garden, lake or sea. On balconies, glass balustrades combine fall protection with wind shelter and, with the right glazing, can provide privacy. Indoors, they allow light to pass between floors, while full glass panels avoid gaps between infill bars. For doors opening without a balcony platform, explore our Juliet balconies. We also supply glass balustrades for pools and commercial spaces such as hotels and restaurants.
Clear glass offers the least obstructed view. Grey-tinted glass reduces light transmission slightly and can complement darker façades. Frosted opal glass lets daylight through while obscuring the view, making it an option for privacy screening.
Depending on the product, we use laminated safety glass made from two panes bonded together with a PVB interlayer that helps retain fragments if the glass breaks. Glass thickness is selected according to the loads involved: 8.76 mm laminated glass is used for many decks and patios, while we recommend 12.76 mm toughened and laminated glass for pool areas, exposed locations and Juliet balconies.
The manufacturing process is certified to EN 1090-1. Production is regularly monitored by RISE, with a focus on traceability, quality and the manufacturing process.
The price depends on the glass type, system and overall length. Our 8.76 mm laminated glass option is generally more economical than 12.76 mm toughened laminated glass. Frameless Vista is a premium option, while post-supported systems such as Arcus generally cost less. Fewer corners and longer straight runs can lower the price per metre. See your price directly in our 3D configurator.
Your glass balustrade is supplied as a complete kit with made-to-measure glass panels, posts, fixings and installation instructions. Fixings must always be suitable for the supporting substrate and load-bearing structure.
Your basket will be emptied if you change country.
