Browse our frequently asked questions and answers, or contact one of our specialists, who are happy to help.
A wire balustrade consists of tensioned wires between posts, creating an open design that takes up little visual space. The wires are made from corrosion-resistant AISI 316 stainless steel and held taut using fixings and adjustable tensioners. The tension can be adjusted during installation and later if needed.
Wire balustrades suit decking, jetties and stairs where you want an open appearance. On staircases, the wires and fixings are adapted to the slope. Maintenance is straightforward: wipe the wires as needed and periodically check the wires, fixings and tensioners. Remember that horizontal wires may be easy for young children to climb.
Horizontal wires and slats may be suitable for some balcony balustrades, but their design needs particular care where children may be present. Horizontal elements can create footholds and make climbing easier. The overall construction and applicable local safety requirements determine whether a design is suitable.
Horizontal slats should also be assessed for possible footholds, and gaps must be appropriate for the safety requirements of the location. Planters and furniture next to a balustrade can also make it easier to climb. Glass or vertical bars are often more appropriate where children are present. On a ground-level patio, horizontal lines may be a practical design choice.
Aluminium balustrades are lightweight, durable outdoors and relatively low-maintenance, making them a practical option for decking and balconies. Powder-coated aluminium generally needs cleaning as required rather than regular repainting. Unlike ordinary steel, aluminium does not develop iron rust.
Aluminium balustrades can be powder-coated in a variety of colours and combined with glass, vertical bars or other infills. Their light weight makes the components easier to handle during installation. Glass helps preserve views and natural light. Aluminium can offer good value over time because of its lower maintenance needs, although the price depends on the model, infill, dimensions and optional extras.
Available colours and finishes depend on the balustrade material and model. Aluminium can be powder-coated in a range of RAL colours, while stainless steel is often chosen with a brushed or polished finish. Glass options may include clear, opaque or tinted glass. You can coordinate the finish with other details on your home.
On some systems, posts, top rails and glass clamps are available in matching or contrasting finishes. This allows the balustrade to complement the façade, windows and doors – for example, black posts with a timber top rail. With Color, you can select a colour to suit your project. The available colours and combinations vary by model.
Aluminium is a durable, low-maintenance material for outdoor balustrades. It resists corrosion well and performs in different weather conditions when the system and finish are appropriate for the location. A powder-coated balustrade does not normally need sanding or repainting.
For routine care, it is usually enough to clean the posts and profiles with water, a soft cloth and, if needed, a mild detergent. Near the sea, rinse away salt and dirt as required. Powder coating provides protection and colour, although weather and UV exposure can affect it over time. Aluminium being lightweight does not automatically make the balustrade less stable.
Your basket will be emptied if you change country.
Mi eget tincidunt nibh eget tellus laoreet pulvinar. Tristique sapien nibh turpis blandit leo elit ut lobortis
Linea combines slender aluminium posts with horizontal wires made of stainless steel—and can be customised with any colour, top rail and fixing to suit your specific environment and style.
2 wires
3 wires
4 wires
5 wires
6 wires
7 wires
8 wires
Square Aluminium, 50x50 mm
Profiled oak
Profiled Jatoba
Natural anodised (silver)
Grey with texture
Black (RAL 9005)
White (RAL 9010)
Any RAL colourLinea wire balustrade, featuring horizontal made of steel and made of aluminium—for those who want a railing that provides protection without obstructing the view. The open design allows both light and views to pass through, making particularly well-suited for balconies, gardens, and other open spaces. wires stainless steel posts powder-coated Linea
The railing is always delivered made to measure and as a complete kit set with pre-cut wires, posts, and hardware. All parts are designed to withstand the elements and long-term use—without you having to worry about rust, painting, or ongoing maintenance.
With its understated design and sleek construction, Linea is suitable for a wide range of applications. It is often used as:
A modern wire balustrade that combines light weight with long-lasting durability—and creates an open, airy feel no matter where it's placed.
Installing Linea is easy—regardless of your previous experience. All the parts you need are included in the kit: posts, wires, brackets, and screws. The balustrade is designed to be installed on various outdoor surfaces, from wooden decks to concrete surfaces and walls.
Here's how it works:
Choose your fixings in the configurator based on where the balustrade will be installed:
All fixings have been tested to ensure secure anchoring on various surfaces – without compromising the railing's design or function.
Once you've placed your order, you'll have access to videos showing you how to install Linea – step by step, tailored to the choices you made in the configurator.
Linea are manufactured at our production facility in Ängelholm. By designing and manufacturing our products in-house, we have full control over quality, strength, and the safety requirements that apply to railings in exposed environments. Each order is customised according to your specifications and comes with a declaration of performance.
Our production is certified in accordance with EN 1090-1 and complies with the applicable Eurocodes for load-bearing aluminium construction products and components made of stainless steel. It is regularly audited by RISE (Research Institutes of Sweden), which is responsible for the independent verification of our procedures and documentation.
To ensure that Linea meets the requirements for both private and public settings, we also conduct our own tests for load-bearing capacity, functionality, and long-term durability.
Here you'll find technical information about Linea – our wire balustrade with aluminium posts and wires made of stainless steel. We’ve compiled data on dimensions, fixings, and installation principles to help you plan and compare options.
All files are available for download as PDFs and will help you prepare your order or complete a safe and proper installation.
Load-tested posts
The posts have been tested with top-mounted fixings on timber substrates and can withstand a load of 0.5–1.0 kN/m.
Square 50×50 mm
Square posts and top rail made of aluminium, measuring 50×50 mm.
Surface coating: 20 µm
Our aluminium profiles are anodized. This is the same principle used on the mast of a sailboat, which is resistant to wind and weather.
Wire Ø 4 mm
Wires is made of stainless steel with a diameter of 4 mm and acid-resistant AISI 316.
Colour options
Posts are available in natural aluminium, white, black, textured grey and seven additional shades of grey as standard options.
Material thickness 2 mm
Square 50×50 mm
Square posts and top rail made of aluminium, measuring 50×50 mm.
Surface coating: 20 µm
Our aluminium profiles are anodized. This is the same principle used on the mast of a sailboat, which is resistant to wind and weather.
Timber top rail
top rail, with a contoured profile, in untreated light oak or jatoba (a hardwood with properties and an appearance similar to teak).
Angles
If there are any corners on the railing, you should cut the wooden crossbar yourself. This ensures a precise fit. Both wood and aluminium can be cut with a standard miter saw. If you choose the aluminium top rail and the corner is 90 degrees, no cutting is required.
Symmetrical Sections
When you enter your measurements in our configurator, you always specify the edge dimensions at the location where you want the railing installed. Our configurator then makes the necessary adjustments. For your railing, we then adjust the section dimensions so that each section on either side is the same length. In other words, we customise the railing to fit your measurements—not the other way around.
Choice of balustrade height
In the configurator, choose a height from 800 to 1,100 mm, measured from the floor to the top of the balustrade. Check the appropriate height for your installation against the relevant local requirements, particularly where there is a fall risk.
Made to the millimetre
When you provide your measurements, please be as precise as possible—down to the millimetre. We’ll craft your railing to the millimetre so that it fits perfectly in the spot where you want to install it.
Top mounting
The base is secured to the floor with 4 screws.
Side fixing
The post is secured with two screws through the side, directly into the supporting surface.
Selectable Mounting Heights
If you choose side mounting, you also have the option to select the mounting height. You can have the post extend downward by 350 mm, 250 mm, 195 mm, or 145 mm. If possible, a greater depth is preferable. The mounting height may affect the number of sections per side.
Top rail with or without wall fixing
If the balustrade meets a wall, you can also choose to fix the top rail to the wall. This can make the structure slightly more stable.
Screw for timber fixing
If you choose to fix into timber, screws are included for this purpose. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal—Corrosion Class C4. The screw features a milled groove along the shank and one at the tip. This results in a very low tightening torque when driving the screw into harder wood and minimizes cracking.
Screw for concrete fixing
If you choose to fix into concrete, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal—Corrosivity Class C4. Approved for use in cracked concrete, uncracked concrete, and hollow-core slabs. Also suitable for solid brick, hollow brick, solid Mexi brick, and natural stone.
Complete kit
Our shipment includes everything you need for assembly. In addition to posts, hinges, and top rail, it also includes all screws, drill bits, and any special tools required. If you have a screwdriver, a wrench, a folding rule, and a spirit level, you really don’t need anything else.
Assembly Videos and Instructions
The videos show various steps to help you with your assembly. Our assembly tips and videos are customised for each order. In other words, these are not general descriptions but are tailored specifically to your order.
Aluminium Parts
Posts or other aluminium parts require minimal maintenance. If stains appear, a mild detergent, water, and a soft cloth are usually sufficient. Do not use products with abrasive properties, acids, or alkaline agents.
Timber top rail
If the railing is to be installed outdoors, we recommend cleaning the top rail and then sanding it with fine-grit sandpaper. Treat top rail with a wood preservative such as wood oil or similar, depending on the prevailing conditions. For indoor installation, only cleaning and light sanding are required. Treatment with wood oil or similar can be done if desired. All oak contains tannic acid in varying amounts, depending on the wood’s moisture content. This is because tannic acid prevents the wood from rotting. When your oaktop rail or handrail is exposed to moisture for the first time in an outdoor environment, tannic acid is released, which can cause discoloration on the surface it rests on. Therefore, we recommend oiling the wood or, alternatively, applying oxalic acid during installation to reduce the release of tannic acid. Oxalic acid can also be used to clean up discoloration on the surface. Consult your paint supplier before using oxalic acid. To keep the wood looking its best, we also recommend oiling it once a year.
Measurement
Measure from the nosing of the top step to the nosing of the bottom step.
Optional balustrade height
The staircase balustrade is the same height as the rest of the balustrade.
Made to the millimetre
When you provide your stair measurements, please be as precise as possible—down to the millimetre. We’ll craft your railing to the millimetre to ensure it fits perfectly in the spot where you want to install it.
Our A+, A, B and C use classes provide guidance on where a particular balustrade configuration may be suitable. They draw on our product testing and take into account factors such as the chosen height, section width and components. These are our own product classifications, not UK building regulation categories. The installation must also meet the requirements that apply at its location.
Use class A+
Our A+ configuration is documented for a minimum horizontal line load of 1 kN/m. The suitability of a particular balustrade for a residential, commercial or public setting depends on the complete configuration and the requirements of the installation site. Where glass is included, the specified safety glazing should be assessed as part of the whole system.
Use class A
Our A configuration is documented for a minimum horizontal line load of 0.5 kN/m. Whether that configuration is suitable for a particular residential installation depends on the site and its applicable requirements. Where glass is included, the specified safety glazing forms part of the overall system.
Class B
Class B railings are suitable for use in environments where the height difference between the floor and the ground is 0.5–3 metres. Our Class B railings can withstand a minimum linear load of 0.5 kN/m, and when the railing includes glass, this acts as a “ safety glass ” that prevents injury in the event of an impact.
Class C
Class C railings are suitable for use at ground level. If the railing includes glass, it is a “ safety glass ” that prevents personal injury in the event of an impact. A balustrade can be classified as Class C if Balustradedesign, in collaboration with you as the customer, makes a modification to the railing that deviates from our standard design. A Class C classification indicates that this specific configuration has not been tested.
